How To Remove Ceramic Coating On A Car
So using a clay bar is very helpful regarding removing the ceramic coating. Clay alone cannot remove the hard ceramic coating of the car but is really effective when combined with some other products.
When the ceramic coating gets old or really worn it gets easier to remove it from the surface using the mixture of clay and iron dust remover.
How to remove ceramic coating on a car. It is widely believed that polishing is the most trusted way to remove a ceramic coating from the surface. Many experts say that polishing is the most effective and trusted way to remove the torn layer of ceramic coating. As there are advantages there are also some disadvantages to this method.
The second step for removing an older ceramic coating is the clay mitt or clay bar treatment. As i mentioned above the best and possibly easiest way to remove ceramic coating is to polish the paint after washing. This method involves using a clay bar with limited slippery stuff which increases friction and may loosen up the adhesion of the coating to the clear coat.
Without further ado let s dive into the required steps. If you have applied a superior quality ceramic coating with a sio2 percentage above 80 the best way to remove it is with clay bar treatment and hand washing. The second method for removing ceramic coatings is using clay.
Clay is used as a prep for installing ceramic coatings as it is great for removing small debris that sticks on the paint surface. During using the clay bar friction is the main key too success. After an extended period of time like 90 of the overall lifespan of the nano coating it will be really thin and easy to remove.
As a result proper friction should be achieved by using any kind of lubricant. Since the ceramic coating is a physical layer polishing is the only surefire way to remove it 100 and expose the clear coat underneath. This will also help to prepare the surface for the new product and remove certain imperfections.
In this you ll use a high quality clay mitt along with a concentrated car wash shampoo lubricant. Polishing off ceramic coatings the only universally accepted method to remove ceramic coatings is mechanical abrasion. There is some clay bar specific lubricants but you can use a high suds producing car shampoo mixed as 1oz soap to 1 liter of water.
You can also use grinder polisher to buff and wax the surface to completely remove the coating. For this process you ll need a medium cut polish like the chemical guys v36 cutting polish or menzerna medium cut 2200.